TP-LINK TD-W8901N User Manual

 

57 

as follows. Presume the rules are both aimed at the interface PVC0, and their indexes are (1, 1), 
(1, 2) and (1, 3). 

Step 1:  Select the “IP/MAC Filter” as the Filter Type Selection (show in Figure 4-39). 

 

Select the “IP” as the Rule Type on the Filter screen, then you can configure the specific 
rule for the example. 

 

Step 2:  Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then 

select the Interface “PVC0”, and select the Direction “Both” for the first rule. 

 



If you want to make the rule take effect, please select Yes to active the rule. 

Step 3:  Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port 

Number” in the corresponding field. 

Step 4:  Select the Protocol as “TCP” and select the Unmatched rule as “Next”. 

Step 5:  Finally, click the SAVE to save the entry.