TP-LINK AC750 User Manual

 

- 90 - 



  Delete Selected - Click the Delete Selected button to delete selected entries in the table. 

1. Click 

the 

Add New button and the next screen will pop up as shown in Figure 4-77. 

2.  Give a name (e.g. Rule_1) for the rule in the Description field. 

3.  Select a host from the LAN Host drop-down list or click“Add LAN Host”. 

4.  Select a target from the Target drop-sown list or click “Add Target”. 

5.  Select a schedule from the Schedule drop-down list or click “Add Schedule”. 

6. In 

the 

Status field, select Enabled or Disabled to enable or disable your entry. 

7. In 

the 

Direction field, select IN or OUT. 

8.  Select a schedule from the Protocol drop-down list. 

9. Click 

the 

Save button. 

 

Figure 4-77 Add Internet Access Control Entry 

For example: If you desire to allow the host with MAC address 00 : 11 : 22 : 33 : 44 : AA to access 

www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the 

LAN to access the Internet, you should follow the settings below:   

1. Click 

the 

submenu 

Rule of Access Control in the left to return to the Rule List page. Select 

Enable Internet Access Control and choose "Allow the packets specified by any 

enabled access control policy to pass through the router".  

2.  We recommend that you click Add New button to finish all the following settings.   

3. Click 

the 

submenu 

Host of Access Control in the left to enter the Host List page. Add a new 

entry with the Host Description is Host_1 and MAC Address is 00:11:22:33:44:AA.