TP-LINK AC750 User Manual

 

- 37 - 



  11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. It 

is strongly recommended that you set the Mode to 802.11bgn mixed, and all of 

802.11b, 802.11g, and 802.11n wireless stations can connect to the router. 



 

Channel - This field determines which operating frequency will be used. The default channel 

is set to Auto, so the AP will choose the best channel automatically. It is not necessary to 

change the wireless channel unless you notice interference problems with another nearby 

access point. 



 

Channel Width - Select the channel width from the drop-down list

.

 

The default setting is 

automatic, which can adjust the channel width for your clients automatically. 



If 11bg mixed is selected in the Mode field, the Channel Width selecting field will turn grey 
and the value will become 20M, which is unable to be changed.   



 

Enable SSID Broadcast - When wireless clients survey the local area for wireless networks 

to associate with, they will detect the SSID broadcast by the router. If you select the Enable 

SSID Broadcast checkbox, the Wireless router will broadcast its name (SSID) on the air.

 



 

 

Check this box to enable WDS. With this function, the router can bridge two or 

more WLANs. If this checkbox is selected, you will have to set the following parameters as 

shown in Figure 4-15. Make sure the following settings are correct.

 

 

Figure 4-15 WDS Setting 



 

SSID (to be bridged) - The SSID of the AP your router is going to connect to as a client. 

You can also use the search function to select the SSID to join. 



 

MAC Address (to be bridged) - The BSSID of the AP your router is going to connect to 

as a client. You can also use the search function to select the BSSID to join. 



 

Scan - Click this button, you can search the AP which runs in the current channel.