TP-LINK AC750 User Manual

 

- 75 - 

Choose menu “Forwarding→Virtual Servers”, and then you can view and add virtual servers 

on this page (shown in Figure 4-62). Virtual servers can be used for setting up public services on 

your LAN. A virtual server is defined as a service port, and all requests from Internet to this 

service port will be redirected to the computer specified by the server IP. Any PC that was used 

for a virtual server must have a static or reserved IP address because its IP address may change 

when using the DHCP function. If you want the Virtual Servers configuration take effect, please 

make sure the NAT is enabled. 

 

Figure 4-62 Virtual Servers 



 

Service Port - The numbers of External Service Ports. You can enter a service port or a 

range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End 

port).  



 

IP Address - The IP address of the PC running the service application.   



 

Internal Port - The Internal Service Port number of the PC running the service application. 

You can leave it blank if the Internal Port is the same as the Service Port, or enter a 

specific port number when Service Port is a single one.   



 

Protocol  - The protocol used for this application, either TCP,  UDP, or All  (all protocols 

supported by the router).   



 

Status - The status of this entry, "Enabled" means the virtual server entry is enabled.   



 

Common Service Port - Some common services already exist in the drop-down list.   



 

Edit - To edit or delete an existing entry.   

1. Click 

the 

Add New button. (pop-up

 

Figure 4-63) 

2.  Select the service you want to use from the Common Service Port list. If the Common 

Service Port menu does not list the service that you want to use, enter the number of the 

service port or service port range in the Service Port field.   

3.  Enter the IP address of the computer running the service application in the IP Address field.