TP-LINK AC750 User Manual
RE200
AC750 WiFi Range Extender User Guide
4.4.1 Connect To Existing Network
Selecting Wireless > Connect To Existing Network will guide you to set the basic parameters to
get a connection to the internet (show in Figure 4-10).
get a connection to the internet (show in Figure 4-10).
Figure 4-10 Connect to Existing Network
Click the Next button to continue, for detailed steps, please refer to
Chapter 3 Quick Installation
Guide
.
Click the Exit button to quit.
4.4.2 Extender Settings
Selecting Wireless > Extender Settings will enable you to configure the basic settings for your
wireless network on the screen below (Figure 4-11)
wireless network on the screen below (Figure 4-11)
Figure 4-11 Extender Settings
¾
Region - Select your region from the drop-down list. This field specifies the region where the
wireless function of this device can be used. It may be illegal to use the wireless function of
this device in a region while you chose a different region in the drop-down list. If your country
or region is not listed, please contact your local government agency for assistance.
wireless function of this device can be used. It may be illegal to use the wireless function of
this device in a region while you chose a different region in the drop-down list. If your country
or region is not listed, please contact your local government agency for assistance.
¾
WiFi Network Name (2.4GHz or 5GHz)- The Range Extender's wireless network name
(SSID) which your PC or other device can be connected to.
(SSID) which your PC or other device can be connected to.
¾
Channel - The current wireless channel in use.
Click Save to save the changes.
19