TP-LINK N600 User Manual

   N600 Wireless Dual Band Gigabit ADSL2+ Modem Router

Then a flash video will pop up and show you how to connect 

your devices. When you finish the hardware connection, click 

        to continue.   

Insert the TP-LINK Resource CD into the CD-ROM drive.

Click  Start Setup.

The  Easy  Setup  Assistant  will  start.  Please  check  to  see  if  the 

LEDs (especially the ADSL LED) of your modem router display 
normally as the chart describes. Then click 

NEXT, and follow the 

step-by-step instruction until you complete the configuration.

Please select your preferred setup wizard.

For Windows users only

For Mac OS/Linux/Windows users who are 

unable to run the Resource CD

( For Windows users only )

For the advanced configurations, please refer to the User Guide on the Resource CD provided. You can also log on to www.tp-link.com -> 
select your region -> search for the product -> User Guide can be found under the “Download” tab on the product page.

Resource CD

Ethernet Cable

Power Adapter

TD-W8980

QIG

Phone Cable x 2

ADSL Splitter

The product model shown in this QIG is TD-W8980, as an example.

For a smoother setup, we suggest that you consult yourISP first 

and ask for the following information . This information will be 

used during the configuration stage.
VPI/VCI:                                            Connection Type:                 

Encapsulation Type (Optional): 

   N600 Wireless Dual Band Giabit ADSL2+ Modem Router

Please select your preferred setup wizard.

For Windows users only

For Mac OS/Linux/Windows users who are 

unable to run the Resource CD

7106504377    REV1.1.0

Click  Quick Setup in the main menu and then click Next. 

Hardware connection.

PHONE MODEM

LINE

Splitter

Phone Cable

Ethernet Cable

Wall Socket

Computer

Phone Cable

Step 1:    Connect your devices step by step following the figure.
Step 2:    Power on all your devices and then check the LEDs 

(especially the ADSL LED).

Open your browser and type http://192.168.1.1 in the 
address  field.  Then  use  the  default  user  name  admin 
and password admin to log in.

( For Mac OS/Linux/Windows users who are unable to run the Resource CD)

If  you  are  unable  to  access  192.168.1.1,  please 
refer to T3 in Troubleshooting.

（Power)

(ADSL)

Name

Status

Indication

On

The modem router is powerd on.

On

ADSL line is synchronized and ready 

to use.

Flashing ADSL negotiation is in progress.

(WLAN)

Flashing Wireless is enabled.

(LAN 1-4)

On

There is a device conneted to this LAN 

port.

Flashing The modem router is sending or receiving 

data over this LAN port.