TP-LINK TL-WR1043ND User Manual
TL-WR1043ND
Wireless N Gigabit Router
-54-
4.8.3 Media Server
Choose menu “USB Settings→Media Server”, and then you can configure Media Server on this
page as shown in Figure 4-37.
Figure 4-37
Media Server Setting
¾
Server Name – The name of this Media Server.
¾
Server Status - Indicates the Media Server’s current status, started or stopped. You can
click the Start button to start the Media Server and click the Stop button to stop it.
¾
Name - The display name of this folder.
¾
File System - The file system type on the partition can be FAT32 or NTFS.
¾
Folder - The real full path of the specified folder.
¾
Delete - You can delete the share folder by click Delete.
To set up your media server, please follow the instructions below:
1. Plug an external USB hard disk drive or USB flash drive into this Router, and then the screen
will appear as shown in Figure 4-38.
Figure 4-38
Media Server Setting
2. Click
the
Start button to start the media server, and then the screen will appear as shown in
Figure 4-39.