TP-LINK TL-WR642G User Manual

 

Select which of the four keys will be used and enter the 

matching WEP key information for your network in the selected key radio button. 
These values must be identical on all wireless stations in your network. 

 

 You can select the WEP key length (64-bit, or 128-bit, or 152-bit) for 

encryption. "Disabled" means the WEP key entry is invalid. 

• 

For 64-bit encryption - You can enter 10 hexadecimal digits (any combination 
of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters.   

• 

For 128-bit encryption - You can enter 26 hexadecimal digits (any combination 
of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters. 

• 

For 152-bit encryption - You can enter 32 hexadecimal digits (any combination 
of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters. 

 

When you select WPA-PSK or WPA for Authentication Type you 

can select either Automatic, or TKIP or AES as Encryption. 

Figure 5-10a: WPA-PSK 

 

You can enter a WPA passphrase between 8 and 63 

characters long. 

 

 - Specify the group key update interval in seconds. The 

value can be either 0 second or from 30 seconds or up, 1-29 seconds is not a 
usable second. Enter 0 to disable the update. 

 

 

 

 

 

             Figure 5-10b: WPA 

 

 - Enter the IP address of the Radius Server 

 

 Enter the port that radius service used. 

 

Radius Password - Enter the password for the Radius Server. 

Be sure to click the Save button to save your settings on this page. 
Note

: The router will reboot automatically after you click save. 

The Wireless MAC Filtering for wireless networks are set on this page, figure 5-11: 

 - 

23 -