TP-LINK TL-WR642G User Manual

 and the Return button. 

6. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-8A in the 

 field, enter wireless station C in the Description field, select 128-bit 

in the Privilege pull-down list, enter 2F34D20BE2E54B326C5476586A in the WEP 
Key

 field and select Enabled in the Status pull-down list. Click the Save and the 

 button. 

The filtering rules that configured should be similar to the following list: 

 

:  

a)  If you select the radio button Allow the stations not specified by any enabled 

 for Filtering Rules, the wireless station B will still 

not be able to access the router, however, other wireless stations that are not in 
the list will be able to access the router. 

b)  If you enable the function and select the Deny the stations not specified by 

 for Filtering Rules, and there are 

not any enable entries in the list, thus, no wireless stations can access the 
router. 

This page shows MAC Address, Current Status, Received Packets and Sent Packets 
for each connected wireless station. 

 

Figure 5-13: The router attached wireless stations 

 

The connected wireless station's MAC address 

 

  - The connected wireless station's running status, one of 

STA-AUTH / STA-ASSOC / AP-UP / WPA / WPA-PSK / None 

 

 - packets received by the station 

 

 - packets sent by the station 

You cannot change any of the values on this page. To update this page and to show the 
current connected wireless stations, click on the Refresh button.   

 - 

26 -