TP-LINK TL-WR740N User Manual

 

- 50 - 

¾

 

Service Port - The numbers of External Ports. You can type a service port or a range of 

service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port 

number).  

¾

 

IP Address - The IP Address of the PC providing the service application. 

¾

 

Protocol - The protocol used for this application, either TCP,  UDP, or All  (all protocols 

supported by the Router). 

¾

 

Status - The status of this entry, either Enabled or Disabled. 

1. Click 

the Add New… button, the next screen will pop-up as shown in Figure 4-32. 

2.  Select the service port you want to use from the Common Service Port list. If the Common 

Service Port list does not have the service that you want to use, type the service port 

number or service port range in the Service Port box. 

3.  Type the IP Address of the computer in the IP Address box.  

4.  Select the protocol used for this application, either TCP, UDP, or All. 

5. Select 

the 

Enable to enable the virtual server. 

6. Click 

the 

Save button.   

 

Figure 4-32    Add or Modify a Virtual Server Entry 

)

If your computer or server has more than one type of available service, please select another 

service, and enter the same IP Address for that computer or server. 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button.