TP-LINK tl-sl5428e User Manual
67
¾
Configuration Procedure
z
Configure Switch A
Step Operation
Description
1 Configure the
Link Type of the
ports
ports
Required. On VLAN→802.1Q VLAN→Port Config page, configure the
link type of Port 11 and Port 13 as ACCESS, and configure the link type
of Port 12 as GENERAL.
link type of Port 11 and Port 13 as ACCESS, and configure the link type
of Port 12 as GENERAL.
2 Create
VLAN10 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 10, owning Port 12 and Port 13, and
configure the egress rule of Port 12 as Untag.
configure the egress rule of Port 12 as Untag.
3 Create
VLAN20 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 20, owning Port 11 and Port 12, and configure
the egress rule of Port 12 as Untag.
the egress rule of Port 12 as Untag.
z
Configure Switch B
Step Operation
Description
1 Configure the
Link Type of the
ports
ports
Required. On VLAN→802.1Q VLAN→Port Config page, configure the
link type of Port 4 and Port 5 as ACCESS, and configure the link type of
Port 3 as GENERAL.
link type of Port 4 and Port 5 as ACCESS, and configure the link type of
Port 3 as GENERAL.
2 Create
VLAN10 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 10, owning Port 3 and Port 4, and configure
the egress rule of Port 3 as Untag.
the egress rule of Port 3 as Untag.
3 Create
VLAN20 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 20, owning Port 3 and Port 5, and configure
the egress rule of Port 3 as Untag.
the egress rule of Port 3 as Untag.
4 Create
Protocol
Template
Required. On VLAN→Protocol VLAN→Protocol Template page,
configure the protocol template practically. E.g. the Ether Type of IP
network packets is 0800 and that of AppleTalk network packets is 809B.
configure the protocol template practically. E.g. the Ether Type of IP
network packets is 0800 and that of AppleTalk network packets is 809B.