TP-LINK TL-WR642G User Manual

 

 

46

1.  Effective Time - Enter a range of time in HHMM format, which point to the range time for the 

entry to take effect. For example, 0803 - 1705, the entry will take effect from 08:03 to 17:05. 

2.  LAN IP Address - Enter a LAN IP Address or a range of LAN IP addresses in the field, in 

dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. Keep the field 

open, which means all LAN IP Addresses have been put into the field.   

3.  LAN Port -Enter a LAN Port or a range of LAN ports in the field. For example, 1030 - 2000. 

Keep the field open, which means all LAN ports have been put into the field.   

4.  WAN IP Address - Enter a WAN IP Address or a range of WAN IP Addresses in the field, in 

dotted-decimal notation format. For example, 61.145.238.6 – 61.145.238.47. Keep the field 

open, which means all WAN IP Addresses have been put into the field.   

5.  WAN Port - Enter a WAN Port or a range of WAN Ports in the field. For example, 25 – 110. 

Keep the field open, which means all WAN Ports have been put into the field.   

6.  Protocol - Select which protocol is to be used, either TCP, UDP, or All  (all protocols 

supported by the router). 

7.  Pass - Select either Allow or Deny through the router. 

8.  Status - Select Enabled or Disabled for this entry on the Status pull-down list. 

9. Click 

the 

 button to save this entry. 

To modify or delete an existing entry: 

1. Click 

the 

in the entry you want to modify. If you want to delete the entry, click the 

. 

2.  Modify the information.   

3. Click 

the 

 button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

You can change the entry’s order as desired. Fore entries are before hind entries. Enter the ID 

number in the first box you want to move and another ID number in second box you want to move 

to, and then click the Move button to change the entry’s order. 

Click the Next button to the next page and click the Previous button to return to the previous 

page. 

If you desire to block E-mail received and sent by the IP Address 192.168.1.7 on 

your local network, and to make the PC with IP Address 192.168.1.8 unable to visit the website of 

IP Address 202.96.134.12, while other PC(s) have no limit you should specify the following IP 

address filtering list: