TP-LINK TL-WR642G User Manual

 

 

54

. 

¾

  Bandwidth – Specifies the bandwidth you want to supply to this entry. 

¾

  Description – Description of this entry. 

¾

  Enable – Enable this entry. This entry won’t be effective unless you check the Enable box. 

Click the Delete button to delete single entry. 

Click the Delete All button to delete all entries. 

Click the Save button to save all configuration. 

, we assume that PC A, B, C are sharing the Internet with 2Mbps bandwidth through 

one router. PC A is often for VoIP or online games, to guarantee its better performance without 

interference from PC B and C, you can specify the minimum bandwidth for PC A such as 

100Kbps. 

) 

1.  The conversion relation of bandwidth: 1 Mbps = 1000Kbps. 

2.  Please choose the Network Connection Type and set the bandwidth according to your 

Network. If you are not clear about that, please contact with your ISP for help. 

3.  IP address range for different entries could not have intersection with each other. 

4.  After the configuration, click the Save button for the change to take effect. 

 

Figure 4-44    the IP & MAC Binding menu 

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-44): Binding 

and ARP List. Click any of them, and you will be able to scan or configure the 

corresponding function. The detailed explanations for each submenu are provided below. 

This page displays the IP & MAC Binding Setting table; you can operate it in accord with your 

desire. (shown in Figure 4-45).