TP-LINK TL-WR740N User Manual

 

¾

 

Region - Select your region from the drop-down list. This field specifies the region where the 

wireless function of the Router can be used. It may be illegal to use the wireless function of 

the Router in a region other than one of those specified in this field. If your country or region 

is not listed, please contact your local government agency for assistance. 

When you select your local region from the drop-down list, click the Save button, and then 

the Note Dialog will appear. Click OK. 

 

Note Dialog   

)

 

Limited by local law regulations, version for North America does not have region selection option. 

¾

 

Channel - This field determines which operating frequency will be used. The default channel 

is set to Auto, so the AP will choose the best channel automatically. It is not necessary to 

change the wireless channel unless you notice interference problems with another nearby 

access point. 

¾

 

Mode - Select the desired mode. The default setting is 11bgn mixed. 

11b only - Select if all of your wireless clients are 802.11b. 

11g only - Select if all of your wireless clients are 802.11g. 

11n only- Select only if all of your wireless clients are 802.11n. 

11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients. 

11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients. 

Select the desired wireless mode. When 802.11g mode is selected, only 802.11g wireless 

stations can connect to the Router. When 802.11n mode is selected, only 802.11n wireless 

stations can connect to the AP. It is strongly recommended that you set the Mode to 

802.11b&g&n, and all of 802.11b, 802.11g, and 802.11n wireless stations can connect to the 

Router. 

¾

 

Channel width - Select any channel width from the drop-down list. The default setting is 

automatic, which can automatically adjust the channel width for your clients. 

)

If  11b only,  11g only, or 11bg mixed is selected in the Mode  field, the Channel Width 
selecting field will turn grey and the value will become 20M, which is unable to be changed.   

¾

 

Max Tx Rate - You can limit the maximum tx rate of the Router through this field. 

37