TP-LINK TL-WR 841 ND User Manual

 

- 47 - 

 

Figure 4-32   

Virtual Servers 

¾

 

Service Port - The numbers of External Ports. You can type a service port or a range of 

service ports (in XXX – YYY format, XXX is the start port number, YYY is the end port 

number).  

¾

 

Internal Port - The Internal Service Port number of the PC running the service application. 

You can leave it blank if the Internal Port is the same as the Service Port, or enter a 

specific port number when Service Port is a single one. 

¾

 

IP Address - The IP Address of the PC providing the service application. 

¾

 

Protocol - The protocol used for this application, either TCP,  UDP, or All  (all protocols 

supported by the Router). 

¾

 

Status - The status of this entry, either Enabled or Disabled. 

1. Click 

the Add New… button, the next screen will pop-up as shown in Figure 4-33. 

2.  Select the service port you want to use from the Common Service Port list. If the Common 

Service Port list does not have the service that you want to use, type the service port 

number or service port range in the Service Port box. 

3.  Type the IP Address of the computer in the IP Address box.  

4.  Select the protocol used for this application, either TCP, UDP, or All. 

5. Select 

the 

Enable to enable the virtual server. 

6. Click 

the 

Save button.