TP-LINK TL-WR 841 ND User Manual

Page of 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
 
- 56 - 
use the password to browse the built-in web pages to perform Administrator tasks while all the 
others will be blocked.   
After click the Add button, your PC's MAC Address will be placed in the list above. 
Click the Save button to save your settings.   
)
 
Note: 
If your PC is blocked but you want to access the Router again, use a pin to press and hold the 
Reset Button (hole) on the back panel for about 5 seconds to reset the Router’s factory defaults 
on the Router’s Web-Based Utility. 
4.9.4  Remote Management 
Choose menu “Security   Remote Management”, you can configure the Remote Management 
function in the screen as shown in Figure 4-42. This feature allows you to manage your Router 
from a remote location via the Internet. 
 
Figure 4-42  Remote Management 
¾
 
Web Management Port - Web browser access normally uses the standard HTTP service 
port 80. This Router's default remote management web port number is 80. For greater 
security, you can change the remote management web port to a custom port by entering that 
number in the box provided. Choose a number between 1 and 65534 but do not use the 
number of any common service port.   
¾
 
Remote Management IP Address - This is the current address you will use when accessing 
your Router from the Internet. This function is disabled when the IP address is set to the 
default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP address. If set to 
255.255.255.255, then all the hosts can access the Router from internet.   
)
 
Note: 
1)  To access the Router, you should type your Router's WAN IP address into your browser's 
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port 
number. For example, if your Router's WAN address is 202.96.12.8, and the port number 
used is 8080, please enter 
http://202.96.12.8:8080
 in your browser. Later, you may be asked 
for the Router's password. After successfully entering the username and password, you will 
be able to access the Router's web-based utility.