TP-LINK TL-WR340GD User Manual

 

 

62

register, login to the router and click the "Network" menu link on the left of your browser, 

and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC 

address is proper MAC address, click the "Clone MAC Address" button and your PC’s 

MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address 

into the "WAN MAC Address" field. The format for the MAC Address is 

XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting. 

 

MAC Clone 

1)  If you start Netmeeting as a sponsor, you don’t need to do anything with the router. 

2)  If you start as a response, you need to configure Virtual Server or DMZ Host. 

3)  How to configure Virtual Server: Login to the router, click the “Forwarding” menu on the 

left of your browser, and click "Virtual Servers" submenu. On the "Virtual Server" page, 

click Add New, then on the “Add or Modify a Virtual Server” page,    enter “1720” into the 

blank behind the “Service Port”, and your IP address behind the IP Address, assuming 

192.168.1.169 for an example, remember to “Enable” and “Save”.   

 

Virtual Servers 

) 

Your opposite side should call your WAN IP, which is displayed on the “Status” page. 

4.  How to enable DMZ Host  ？ 

Login to the router, click the “Forwarding” menu on the left of your browser, and click "DMZ" 

submenu. On the "DMZ" page, click “Enable” radio and type your IP address into the “DMZ Host 

IP Address” field, using 192.168.1.169 as an example, remember to click the "Save” button.   

 

DMZ