TP-LINK TL-WR 841 N User Manual

 

- 27 - 

fields are case-sensitive. 

¾

 

Auth Server - Enter the authenticating server IP address or host name. 

¾

 

Auth Domain - Type in the domain suffix server name based on your location. 

e.g. 

NSW / ACT - nsw.bigpond.net.au 
VIC / TAS / WA / SA / NT - vic.bigpond.net.au 
QLD - qld.bigpond.net.au 

¾

 

MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks 

is 1500 Bytes. It is not recommended that you change the default MTU Size unless required 

by your ISP. 

¾

 

Connect on Demand - In this mode, the Internet connection can be terminated automatically 

after a specified inactivity period (Max Idle Time) and be re-established when you attempt to 

access the Internet again.  If you want your Internet connection keeps active all the time, 

please enter “0” in the Max Idle Time field.

 

Otherwise, enter the number of minutes you want 

to have elapsed before your Internet access disconnects. 

¾

 

Connect Automatically - The connection can be re-established automatically when it was 

down. 

¾

 

Connect Manually - You can click the Connect/Disconnect  button to connect/disconnect 

immediately. This mode also supports the Max Idle Time function as Connect on Demand 

mode. The Internet connection can be disconnected automatically after a specified inactivity 

period and re-established when you attempt to access the Internet again.   

Click the Connect button to connect immediately. Click the Disconnect button to disconnect 

immediately. 

Caution: Sometimes the connection cannot be terminated although you specify a time to Max Idle 

Time because some applications are visiting the Internet continually in the background. 

Click the Save button to save your settings. 

5.  If your ISP provides L2TP connection, please select L2TP/Russia L2TP option. And you 

should enter the following parameters (Figure 4-11):