TP-LINK TL-WR 841 N User Manual

 

- 36 - 

 

Figure 4-17 

¾

 

SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client. 

You can also use the search function to select the SSID to join. 

¾

 

BSSID(to be bridged) - The BSSID of the AP your Router is going to connect to as a 

client. You can also use the search function to select the BSSID to join. 

¾

 

Survey - Click this button, you can search the AP which runs in the current channel. 

¾

 

Key type - This option should be chosen according to the AP's security configuration. It 

is recommended that the security type is the same as your AP's security type 

¾

 

WEP Index - This option should be chosen if the key type is WEP(ASCII) or 

WEP(HEX).It indicates the index of the WEP key. 

¾

 

Auth Type - This option should be chosen if the key type is WEP(ASCII) or 

WEP(HEX).It indicates the authorization type of the Root AP. 

¾

 

Password - If the AP your Router is going to connect needs password, you need to fill 

the password in this blank.

 

Choose menu “Wireless  → Wireless Security”, you can configure the security settings of your 

wireless network. 

There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), 

WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA-PSK (Pre-Shared Key), 

WPA2-PSK (Pre-Shared Key).