TP-LINK TL-SC3430N User Manual

 

 

46

9

  Obtain an IP address automatically (DHCP) – If a DHCP server is installed and enabled 

on the network, to select this for the IP address can be assigned by the DHCP server. 

9

  Use the following IP address - Select this when the fixed IP address is set. 

—

 

IP address: Enter the IP address of the Camera, which must be in the same subnet 
with that of the desired AP/ Router. 

—

 

Subnet mask: Enter the subnet mask. 

—

 

Default gateway: Enter the default gateway. 

9

  Obtain DNS server address automatically - If you select Obtain an IP address 

automatically (DHCP) above, this entry will display in the figure. Select this to obtain the 
address of DNS server automatically. 

9

  Use the following DNS server address - Select this when you set the fixed address as 

the IP address of DNS server. 

—

 

Primary DNS server: Enter the IP address of the primary DNS server. 

—

 

Secondary DNS server: Enter the IP address of the secondary DNS server, if 
necessary. 

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network 
quickly. 

If the router supports Wi-Fi Protected Setup (WPS) or Quick Setup Security (QSS), you can establish a 
wireless connection between wireless IP Camera and router using either Push Button Configuration 
(PBC) method or PIN method. 

 

1.  Press the QSS button of the router.   

2. Press 

the 

WPS button on the Camera in two minutes.   

 1.  Firstly, check PIN in the following screen. You can also click the Generate new PIN to get a 

new PIN.