TP-LINK TL-SG3424P User Manual
Figure 8-11 Port Filter
The following entries are displayed on this screen:
¾
Port Filter Config
Port Select:
Click the Select button to quick-select the corresponding port
based on the port number you entered.
based on the port number you entered.
Select:
Select the desired port for multicast filtering. It is multi-optional.
Port:
Displays the port number.
Filter:
Select Enable/Disable multicast filtering feature on the port.
Action Mode:
Select the action mode to process multicast packets when the
multicast IP is in the filtering IP-range.
multicast IP is in the filtering IP-range.
z
Permit: Only the multicast packets whose multicast IP is in
the IP-range will be processed.
the IP-range will be processed.
z
Deny: Only the multicast packets whose multicast IP is not in
the IP-range will be processed.
the IP-range will be processed.
Bound IP-Range (ID):
Enter the IP-rang ID the port will be bound to.
Max Groups:
Specify the maximum number of multicast groups to prevent some
ports taking up too much bandwidth.
ports taking up too much bandwidth.
LAG:
Displays the LAG number which the port belongs to.
Note:
1. Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled.
2. Multicast Filter feature has no effect on static multicast IP.
3. Up to 5 IP-Ranges can be bound to one port.
112