TP-LINK TL-SG3424P User Manual
z
Configure Switch B
Step Operation
Description
1 Configure the
Link Type of the
ports
ports
Required. On VLAN→802.1Q VLAN→Port Config page, configure the
link type of Port 21 and Port 22 as GENERAL and TRUNK respectively.
link type of Port 21 and Port 22 as GENERAL and TRUNK respectively.
2 Create
VLAN10 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 10, owning Port 21 and Port 22, and
configure the egress rule of Port 21 as Untag.
configure the egress rule of Port 21 as Untag.
3 Create
VLAN20 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 20, owning Port 21 and Port 22, and
configure the egress rule of Port 21 as Untag.
configure the egress rule of Port 21 as Untag.
4 Configure
MAC
VLAN 10
On VLAN→MAC VLAN page, create MAC VLAN10 with the MAC
address as 00-19-56-8A-4C-71.
address as 00-19-56-8A-4C-71.
5 Configure
MAC
VLAN 20
On VLAN→MAC VLAN page, create MAC VLAN10 with the MAC
address as 00-19-56-82-3B-70.
address as 00-19-56-82-3B-70.
z
Configure Switch C
Step Operation
Description
1 Configure the
Link Type of the
ports
ports
Required. On VLAN→802.1Q VLAN→Port Config page, configure the
link type of Port 2 and Port 3 as GENERAL, and configure the link type
of Port 4 and Port 5 as ACCESS.
link type of Port 2 and Port 3 as GENERAL, and configure the link type
of Port 4 and Port 5 as ACCESS.
2 Create
VLAN10 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 10, owning Port 2, Port 3 and Port 5,
3 Create
VLAN20 Required.
On
VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 20, owning Port 2, Port 3 and Port 4,
6.6 Application Example for Protocol VLAN
¾
Network Requirements
z
Department A is connected to the company LAN via Port12 of switch A;
z
Department A has IP host and AppleTalk host;
z
IP host, in VLAN10, is served by IP server while AppleTalk host is served by AppleTalk server;
z
Switch B is connected to IP server and AppleTalk server.
¾
Network Diagram
71