TP-LINK TL-SL2226P User Manual

The LED indicators include Power, 100Mbps, Link/ACT and slot can display the working 

status of the   switch, more details as follows: 

 

 

 

Figure 3-3 TL- SF2109P Switch LEDs sketch 

 

: After power on, the LED will be light always. If it is turned off, check the 

connection of the power source. 

 

: When a port is connected to a device with the 100Mbps, the 

corresponding green LED is light, or else it is turned off. 

 

: when transferring the data between two devices, the corresponding 

LEDs will be flicker with green. 

 

: When inserted a UTP/fiber module card, LED is green. If it is turned off, check 

the connection of the card. (The LED is only in TL-SF2109P) 

 

TL-SL2226P supports the TL-SM201/TL-SM301 serials module cards. TL-SF2109P and 
TL-SF2117P supply the TL-SM201 serial module cards. Every type of modules contains 
two category, fiber and UTP. 

1） Fiber Modules 

The switch supports many optional fiber module card, include the SMF and MMF their 
interface is SC. Every module’s transporting distance is not the same, more details in 
fiber module User’s Guide. 

2）  UTP Modules 

TL-SF2109P and TL-Sf2117P’s module work only in 100M full-duplex, TL-SL2226P can 
support 100/1000M module. 

 

Before inserting the module, please turn off the power, take off the baffle, and 

then insert the module along the rails, fasten the serwes finally. 
 
 
 

- 7 -