TP-LINK TL-SG3424P User Manual

 

155

 

Spanning Tree globally. To return to the default configuration, please use no 

 command. A switch removes MAC address entries 

upon receiving TC-BPDUs. If a malicious user continuously sends TC-BPDUs to 

a switch, the switch will be busy with removing MAC address entries, which may 

decrease the performance and stability of the network. 

 [ threshold threshold ] [ period period ] 

  ——  TC Threshold, ranging from 1 to 100 packets. By default, it is 20. 

TC Threshold is the maximum number of the TC-BPDUs received by the switch 

in a TC Protect Cycle. 

  ——  TC Protect Cycle, ranging from 1 to 10 in seconds. By default, it is 

5. 

Global Configuration Mode 

Configure TC Threshold as 30 packets, and TC Protect Cycle as 10 seconds: 

 30 period 10 

The spanning-tree security command is used to configure MSTP Port Protect. 

To return to the default configuration, please use no spanning-tree security 

command. Port Protect function is to prevent the devices from any malicious 

attack against STP features. 

 [loop { disable | enable }] [root { disable | enable }] [TC 

{ disable | enable }] [defend { disable | enable }] [hold { disable | enable }] 

loop  ——  Enable/ Disable Loop Protect. By default, it is disabled. Loop Protect 

is to prevent the loops in the network brought by recalculating STP because of 

link failures and network congestions. 

root  ——  Enable/ Disable Root Protect. By default, it is disabled. Root Protect