TP-LINK TL-SG3424P User Manual

 

173

 

The  snmp view-add command is used to add View. To delete the 

corresponding View, please use no snmp view-add command. The OID 

(Object Identifier) of the SNMP packets is used to describe the managed objects 

of the switch, and the MIB (Management Information Base) is the set of the 

OIDs. The SNMP View is created for the SNMP management station to manage 

MIB objects. 

{name} {mib-oid} { include | exclude } 

 {name} {mib-oid} 

  —— The entry name of View, ranging from 1 to 16 characters. Each 

View can include several entries with the same name. 

  ——  MIB Object ID. It is the Object Identifier (OID) for the entry of View, 

ranging from 1 to 61 characters. 

include | exclude —— View Type, with include and exclude options. They 

represent the view entry can/cannot be managed by the SNMP management 

station individually. 

Global Configuration Mode 

Add a View named view1, configuring the OID as 1.3.6.1.6.3.20, and this OID 

can be managed by the SNMP management station: 

view1 1.3.6.1.6.3.20 include 

The snmp group-add command is used to manage and configure the SNMP 

group. To delete the corresponding SNMP group, please use no snmp 

 command. SNMP v3 provides the VACM (View-based Access 

Control Model) and USM (User-Based Security Model) mechanisms for 

authentication. The users in the SNMP Group can manage the device via the 

Read View, Write View and Notify View. And the authentication mode and the