TP-LINK TL-SG3424P User Manual

 

190

 

LLDP function enables network devices to advertise their own device information periodically to 

neighbors on the same LAN. The information of the LLDP devices in the LAN can be stored by its 

neighbor in a standard MIB, so it is possible for the information to be accessed by a Network 

Management System (NMS) using SNMP. 

The  lldp enable command is used to enable LLDP function. To return to the 

default configuration, please use no lldp enable command.   

 

Global Configuration Mode 

Enable lldp function globally: 

The  lldp hold-multiplier command is used to configure the Hold Multiplier 

parameter. The aging time of the local information in the neighbor device is 

determined by the actual TTL value used in the sending LLDPDU. TTL = Hold 

Multiplier * Transmit Interval. To return to the default configuration, please use 

 command. 

lldp hold-multiplier multiplier 

  ——  Configure the Hold Multiplier parameter. It ranges from 2 to 10. 

By default, it is 4.