TP-LINK TL-SG3424P User Manual
22
Chapter 5
Protocol VLAN Commands
Protocol VLAN (Virtual Local Area Network) is the way to classify VLANs based on Protocols. A
Protocol is relative to a single VLAN ID. The untagged packets and the priority-tagged packets
matching the protocol template will be tagged with this VLAN ID.
protocol-vlan template
Description
The protocol-vlan template command is used to create or delete Protocol
VLAN template.
Syntax
protocol-vlan template add
{protocol-name} {ether-type} {frame-type}
protocol-vlan template remove index
Parameter
protocol-name
—— Give a name for the Protocol Template , which contains 8
characters at most.
ether-type
——Enter the Ethernet protocol type field in the protocol template,
composing 4 Hex integers.
index
—— The number of the Protocol template.You can get the template
corresponding to the number by the show protocol-vlan template command.
frame-type
——Frame Type for the Protocol Templete.
Command Mode
Global Configuration Mode
Example
Create a Protocol VLAN template named “arp” whose Frame-type is ethernet2,
Ethernet protocol type is 0806. Delete the Protocol template whose number is 2:
Ethernet protocol type is 0806. Delete the Protocol template whose number is 2:
TP-LINK(config)# protocol-vlan template add
arp 0806 ethernet2
TP-LINK(config)# protocol-vlan template remove
2
protocol-vlan vlan
Description
The protocol-vlan vlan command is used to create a Protocol VLAN entry.To
delete a Protocol VLAN entry ,please use no protocol-vlan command.
delete a Protocol VLAN entry ,please use no protocol-vlan command.
Syntax