TP-LINK TL-SG3424P User Manual

 

81

 

The logging local flash command is used to configure the level and the status 

of the log file input.To restore to the default configuration, please use no 

command. The log file indicates the flash sector for saving 

system log. The inforamtion in the log file will not be lost after the switch is 

restarted and can be got by the show logging flash command. 

{level} [ disable | enable ] 

 ——Severity level of the log information output to each channel.

There are 

8 severity levels marked with values 0-7. The smaller value has the higher 

priority. Only the log with the same or smaller severity level value will be output. 

By default, it is 4 indicating that the log information marked with 0~4 will be 

saved in the log buffer. 

disable | enable ——Disable or enable the log file. By default, it is enabled. 

Global Configuration Mode 

Enable the log file function and set the severity as 7: 

7 

The logging clear command is used to clear the information in the log buffer 

and log file.   

[ buffer | flash ] 

buffer | flash —The output channels: buffer and flash. Clear the information of 

the two channels, by default. 

Global Configuration Mode