TP-LINK tl-sl5428e User Manual
![TP-LINK](https://files.manualsbrain.com/attachments/4d45e1da28d82d97a14cc52b904d065832fadc3e/common/fit/150/50/19c41f2620d27a16e36b513f2e907691223c5e6ec2f2f5e9ece0de10684a/brand_logo.png)
5.1.5 Loopback Detection
With loopback detection feature enabled, the switch can detect loops using loopback detection
packets. When a loop is detected, the switch will display an alert or further block the corresponding
port according to the port configuration.
packets. When a loop is detected, the switch will display an alert or further block the corresponding
port according to the port configuration.
Choose the menu Switching→Port→LoopbackDetection to load the following page.
Figure 5-5 Loopback Detection Config
The following entries are displayed on this screen:
Global Config
LoopbackDetection
Status:
Status:
Here you can enable or disable Loopback Detection function
globally.
globally.
Detection Interval:
Set a Loopback Detection interval between 1 and 1000 seconds.
By default, it’s 30 seconds.
By default, it’s 30 seconds.
Automatic
Recovery Time:
Recovery Time:
Time after which the blocked port would automatically recover to
normal status. It can be set as integral times of detection interval.
normal status. It can be set as integral times of detection interval.
Web Refresh Status:
Here you can enable or disable web automatic refresh.
Web Refresh Interval:
Set a web refresh interval between 3 and 100 seconds. By
default, it’s 6 seconds.
default, it’s 6 seconds.
35