Trendnet TEW-P1U User Manual

 

8.Upgrading Print Server 

Upgrading print server will allow you to replace its firmware inside the print server while the 
newer software version of the print server is available from your local dealer. Depending on 
the different systems users might use, this chapter is divided into several Sections; please 
refer to the following list for your systems. 
 

 
Note: 1. 

Before you proceed to upgrade the print server, please ensure that the 

necessary binary file is located in your current working directory. 

 
          2.Before upgrading print server, please ensure print server is not printing jobs. In case 

of printing, you have to wait till the current print job is finished before you can proceed.  

 

 
 

1.  Log into your NetWare file server as a Supervisor  (Admin.) or equivalent. 
 
2.  Ensure binary file is located in the PSAdmin directory. 
 
3. Run 

PSAdmin from your Windows PC. 

 
4. Click 

the 

Upgrade icon in tool bar. 

 
 
Upgrading the print server from Windows NT/2000/XP (Through TCP/IP) 

 

1.  Ensure binary file is located in your current working directory. 
 
2.  At NT/2000/XP’s DOS prompt, and type “tftp <print server’s IP address > get 

upgrade“. 

 
3. Type 

“tftp –i <print server’s IP address> put mpsXX.bin“. 

 
4.  Wait for the transfer successful message. 
 

 

68