Trendnet TW100-BRV204 User Manual

TW100-BRV204 User Guide 

44 

 

Use this to Enable or Disable this Special Application as required. 

Enter a descriptive name to identify this Special Application. 

•  Type - Select the protocol (TCP or UDP) used when you receive data 

from the special application or service. (Note: Some applications use 
different protocols for outgoing and incoming data). 

•  Start - Enter the beginning of the range of port numbers used by the 

application server, for data you receive. If the application uses a single 
port number, enter it in both the "Start" and "Finish" fields. 

•  Finish - Enter the end of the range of port numbers used by the applica-

tion server, for data you receive. 

•  Type - Select the protocol (TCP or UDP) used when you send data to 

the remote system or service. 

•  Start - Enter the beginning of the range of port numbers used by the 

application server, for data you send to it. If the application uses a sin-
gle port number, enter it in both the "Start" and "Finish" fields. 

•  Finish - Enter the end of the range of port numbers used by the applica-

tion server, for data you send to it. If the application uses a single port 
number, enter it in both the "Start" and "Finish" fields. 

 

•  Configure the Special Applications screen as required. 
•  On your PC, use the application normally. Remember that only one (1) PC can use each 

Special application at any time. Also, when 1 PC is finished using a particular Special Ap-
plication, there may need to be a "Time-out" before another PC can use the same Special 
Application. The "Time-out" period may be up to 3 minutes.