Trendnet TW100-BRV204 User Manual
TW100-BRV204 User Guide
62
Firewall Rules
If enabled, the log will details of packets blocked by user-defined
Firewall rules. Logging can be set for each rule individually.
Only rules which have logging enabled will be included.
Firewall rules. Logging can be set for each rule individually.
Only rules which have logging enabled will be included.
VPN
If enabled, the VPN log will record incoming and outgoing VPN
connections.
connections.
Timezone
Timezone
Select the correct Timezone for your location. This is required for
the date/time shown on the logs to be correct.
the date/time shown on the logs to be correct.
Enable Daylight
Saving
Saving
If your location uses Daylight Saving, you should enable this
when daylight saving starts, and disable it when daylight saving
finishes.
when daylight saving starts, and disable it when daylight saving
finishes.
E-Mail Logs
Send E-mail alert
If enabled, an E-mail will be sent immediately if a DoS (Denial of
Service) attack is detected. If enabled, the E-mail address infor-
mation must be provided.
Service) attack is detected. If enabled, the E-mail address infor-
mation must be provided.
E-mail Logs
You can choose to have the logs E-mailed to you, by enabling
either or both checkboxes. If enabled, the Log will send to the
specified E-mail address. The interval between E-mails is deter-
mined by the "Send" setting.
either or both checkboxes. If enabled, the Log will send to the
specified E-mail address. The interval between E-mails is deter-
mined by the "Send" setting.
Send
Select the desired option for sending the log by E-mail.
• When log is full - The time is not fixed. The log will be sent
• When log is full - The time is not fixed. The log will be sent
when the log is full, which will depend on the volume of traf-
fic.
fic.
• Every day, Every Monday ... - The log is sent on the
interval specified.
• If "Every day" is selected, the log is sent at the time
• If "Every day" is selected, the log is sent at the time
specified.
• If the day is specified, the log is sent once per week, on
the specified day.
• Select the time of day you wish the E-mail to be sent.
• If the log is full before the time specified to send it, it
• If the log is full before the time specified to send it, it
will be sent regardless of the day and time specified.
E-mail Address
Enter the E-mail address the Log is to be sent to. The E-mail will
also show this address as the Sender's address.
also show this address as the Sender's address.
Subject
Enter the text string to be shown in the "Subject" field for the E-
mail.
mail.
SMTP Server
Enter the address or IP address of the SMTP (Simple Mail Trans-
port Protocol) Server you use for outgoing E-mail.
port Protocol) Server you use for outgoing E-mail.
Port No.
Enter the port number used to connect to the SMTP Server. The
default value is 25.
default value is 25.
Syslog Server
Enable Syslog
If enabled, log data will be sent to your Syslog Server.
Syslog Server
Enter the IP address of your Syslog Server.
Include
Select the logs you wish to be included.