Trendnet TW100-BRV324 User Manual
Broadband VPN Gateway User Guide
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
Power On
- Power on.
Off - No power.
Status (Red)
On - Error condition.
Off - Normal operation.
Blinking - This LED blinks during start up.
WAN ports
(10/100BaseT)
(10/100BaseT)
Connect the DSL or Cable Modem here. If your modem came with a
cable, use the supplied cable. Otherwise, use a standard LAN cable.
cable, use the supplied cable. Otherwise, use a standard LAN cable.
LAN
Each port has 2 LEDs
• Link/Act
• On - Corresponding LAN (hub) port is active.
• Off - No active connection on the corresponding LAN (hub)
• Off - No active connection on the corresponding LAN (hub)
port.
• Flashing - Data is being transmitted or received via the corres-
ponding LAN (hub) port.
• 100
• On - Corresponding LAN (hub) port is using 100BaseT.
• Off - Corresponding LAN (hub) port connection is using
• Off - Corresponding LAN (hub) port connection is using
10BaseT, or no active connection.
WLAN LED
On - Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless access
point. This includes "network traffic" as well as user data.
point. This includes "network traffic" as well as user data.
4