Brother CS-8150 User Manual

Page of 141
UTILITY STITCHES  ———————————————————————————————————————————————————————
102
GETTING READ
CONTENTS
SEWING BASICS
U
T
IL
IT
 S
T
ITCHES
APPENDIX
INDEX
Scallop stitching
The wave-shaped repeating pattern that looks like 
shells is called “scalloping”. It is used on the collars 
of blouses and to decorate the edges of 
handkerchiefs.
1
Attach monogramming foot “N”.
• For details, refer to “Replacing the presser 
foot” (page 41).
2
Select stitch 
21
.
• For details, refer to “Selecting stitching” 
(page 66).
3
Stitch along the edge of the fabric, making 
sure not to sew directly on the edge of the 
fabric.
• For better results, apply spray starch onto the 
fabric and press with a hot iron before it is 
sewn.
4
Trim along the stitches.
• Be careful not to cut the stitches.
Smocking
The decorative stitch created by stitching or 
embroidering over gathers is called “smocking”. It is 
used to decorate the front of blouses or cuffs.
The smocking stitch adds texture and elasticity to 
fabric.
1
Attach zigzag foot “J”.
• For details, refer to “Replacing the presser 
foot” (page 41).
2
Select the straight stitch, and then adjust the 
stitch length to 4.0 mm (3/16 inch) and loosen 
the thread tension.
• For details, refer to “Adjusting the stitch 
length” (page 58) and “Changing the tension 
of the upper thread” (page 56).
3
Sew parallel stitching at intervals of 1 cm 
(3/8 inch).
1 1 cm (3/8 inch)
• It is not necessary to sew reverse/
reinforcement stitches or cut the thread.
4
Pull the bobbin threads to create gathers.
Smooth the gathers by ironing them.
J
1
S3_brotherE.book  Page 102  Thursday, May 15, 2003  1:58 PM