Brother CS-8150 User Manual
Maintenance 125
GETTING READ
CONTENTS
SEWING BASICS
U
T
IL
IT
S
T
ITCHES
APPENDIX
INDEX
3
Turn the balance wheel toward you until the
tip of the shuttle hook aligns with the edge of
the race shelf.
tip of the shuttle hook aligns with the edge of
the race shelf.
1 Shuttle race
2 Shuttle
3 Edge of the shuttle race
4 Tip of the shuttle hook
2 Shuttle
3 Edge of the shuttle race
4 Tip of the shuttle hook
• Be sure to turn the balance wheel toward
you. Turning the balance wheel away from
you may damage the machine.
you may damage the machine.
4
Remove the shuttle.
Grasp the shuttle, and then pull it out.
Grasp the shuttle, and then pull it out.
1 Shuttle
5
Use the cleaning brush or a vacuum cleaner to
remove any lint and dust from the race and its
surrounding area.
remove any lint and dust from the race and its
surrounding area.
1 Cleaning brush
2 Shuttle race
2 Shuttle race
• Do not apply oil to the shuttle.
6
Check that the edge of the race shelf is
positioned as in step
positioned as in step
3
, and then insert the
shuttle so that the projection on the shuttle
aligns with the spring.
aligns with the spring.
1 Projection
2 Spring
2 Spring
7
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover back
on.
the needle plate, and then slide the cover back
on.
3
1
2
4
1
1
2
●
Never use a shuttle that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
shuttle (part code: XC3153-051), contact
your nearest authorized service center.
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new
shuttle (part code: XC3153-051), contact
your nearest authorized service center.
●
Be sure that the shuttle is correctly
installed, otherwise the needle may
break.
installed, otherwise the needle may
break.
1
2
2
1
CAUTION
S3_brotherE.book Page 125 Thursday, May 15, 2003 1:58 PM