JVC 0503-FO-ID-VP User Manual

Page of 114
EN
 
81
Master Page: Right-Heading0
USER MAINTENANCE
1
Turn off the camcorder.
2
Loosen the grip strap.
3
Slide and hold OPEN/EJECT in the direction of 
the arrow, then pull the cassette holder cover 
open until it locks. The cassette holder opens 
automatically. Remove the cassette.
4
Press “PUSH HERE” to close the cassette holder.
● Once the cassette holder is closed, it recedes 
automatically. Wait until it recedes completely 
before closing the cassette holder cover.
5
Slide BATT.RELEASE 
1 and remove the battery 
pack 
2 3. 
1
To clean the exterior, wipe gently with a soft 
cloth.
Put the cloth in diluted mild soap and wring it 
well to wipe off heavy dirt. Then wipe again with 
a dry cloth.
2
Press PUSH OPEN and open the LCD monitor. 
Wipe gently with a soft cloth. Be careful not to 
damage the monitor. Close the LCD monitor.
3
To clean the lens, blow it with a blower brush, 
then wipe gently with lens cleaning paper.
4
To clean the viewfinder, raise the viewfinder to 
the vertical position.
5
Open the viewfinder cleaning hatch in the 
direction of the arrow A.
Insert a lens blower or soft cloth into the gap at 
the bottom of the viewfinder and clean the 
interior of the viewfinder with it B.
6
Close the hatch. Tilt the viewfinder back to the 
horizontal position and push it back in. 
NOTES:
● Avoid using strong cleaning agents such as 
benzine or alcohol.
● Cleaning should be done only after the battery 
pack has been removed or other power units have 
been disconnected.
● Mould may form if the lens is left dirty.
● When using a cleaner or chemically treated cloth 
refer to the cautions of each product.
After Use
BATT.RELEASE Switch
Remove.
Cassette holder
cover
Cassette holder 
PUSH HERE
OPEN/EJECT Switch
Cleaning The Camcorder
Hatch
Lens blower
RE
FERENCES
GR-HD1US.book  Page 81  Monday, April 14, 2003  5:21 PM