Husqvarna 142RB User Manual
English –
23
Technical data
Engine
Cylinder capacity, cm
3
/cu. inch
Cylinder bore, mm/inch
Stroke length, mm/inch
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Spark arrestor screen
Stroke length, mm/inch
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Spark arrestor screen
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm/inch
Spark plug
Electrode gap, mm/inch
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litres/US pint
Fuel tank capacity, litres/US pint
Weight
Weight without fuel, cutting tool and guard,
kg/lbs
kg/lbs
Noise levels
Equivalent noise pressure level at the user’s ear,
measured according to prEN 31806 and ISO
7917, dB(A), min/max:
Equivalent noise power level at the user’s ear,
measured according to prEN 31806 and ISO
10884, dB(A), min/max:
measured according to prEN 31806 and ISO
7917, dB(A), min/max:
Equivalent noise power level at the user’s ear,
measured according to prEN 31806 and ISO
10884, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to prEN 31806 and ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
according to prEN 31806 and ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
TECHNICAL DATA
Approved accessories 142RB/152RB
Centre hole in blades Ø 20 mm
Threaded blade axle M12
Grass blade/grass knife
Threaded blade axle M12
Grass blade/grass knife
Trimmer head
Support cup
Type
Multi 275-4 (Ø 275 4-teeth)
Multi 300-3 (Ø 300 3-teeth)
Trimmy S II
Trimmy H II
Superauto III
Fixed
Multi 300-3 (Ø 300 3-teeth)
Trimmy S II
Trimmy H II
Superauto III
Fixed
Cutting attachment guard Art No.
531 00 77-01
531 00 77-01
531 00 77-01
531 00 77-01
531 00 77-01
-
531 00 77-01
531 00 77-01
531 00 77-01
531 00 77-01
-
142RB
41,5/2,53
40/1,57
33/1,30
2 600
10 400
8 060
1,3kW/ 6 500 rpm
No
No
No
40/1,57
33/1,30
2 600
10 400
8 060
1,3kW/ 6 500 rpm
No
No
No
Ikeda Denso
NGK BPMR6Y
0,6–0,7/0,02–0,03
NGK BPMR6Y
0,6–0,7/0,02–0,03
Walbro WYJ
1,0/2,11
1,0/2,11
11,5/25,4
97/98
109/110
1,4/1,4
1,4/1,4
1,5/2,3
11,5/9,0
1,4/1,4
1,5/2,3
11,5/9,0
152RB
50,2/3,06
44/1,73
33/1,30
2 600
10 400
8 060
1,5kW/ 6 500 rpm
No
No
No
44/1,73
33/1,30
2 600
10 400
8 060
1,5kW/ 6 500 rpm
No
No
No
Ikeda Denso
NGK BPMR6Y
0,6–0,7/0,02–0,03
NGK BPMR6Y
0,6–0,7/0,02–0,03
Walbro WYJ
1,0/2,11
1,0/2,11
11,5/25,4
97/98
109/110
1,4/1,4
1,4/1,4
1,5/2,3
11,5/9,0
1,4/1,4
1,5/2,3
11,5/9,0
NOTE!
The noise and vibration measurments are made with all for the machine approved cutting equipment.
The maximum and minimum values are stated in the table above.
The noise and vibration measurments are made with all for the machine approved cutting equipment.
The maximum and minimum values are stated in the table above.