JVC HR-DD445EK User Manual

Reverse

Forward

Search

Play

Slow-Motion

*Still

Slow-Motion

Play

Search

-9x -7x -5x -3x

-1x

-1/6x -1/18x

0

1/18x

1/6x

1x

2x 3x 5x 7x 9x

-7x

-3x

-1/6x -1/18x

0

1/18x

1/6x

1x

2x

5x

9x

Audio is output.

Audio is not

Audio is

Audio is not

Audio is output.

output.

output.

output.

* Still mode cannot be engaged using the remote control's PUSH JOG or the recorder's TIME SCAN button.

5

The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required.

1 Press MENU twice to access the Main Menu screen.
2 Move the highlight bar (pointer) to "MODE SET" by pressing PUSH JOG 

%fi, then press OK.

3 Move the highlight bar (pointer) to "TIME SCAN AUDIO" by pressing PUSH JOG 

%fi, then

press PUSH JOG    to select "ON" or "OFF".

4 Press MENU to return to the normal screen.

● The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be

distorted.)

● To resume normal playback, press PLAY.

● Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback

once, and then try using TimeScan again.

● The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with

LP recordings.)

● Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP

recordings, or depending on the tape being used.

● Picture may appear distorted in comparison to normal playback.

● In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

● TimeScan sound quality will differ in comparison to normal playback.

● When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

B. E. S. T.

5∞] = [   ] : ON/OFF

%