JVC HR-J795EK User Manual

advanced features

The VCR needs to find, identify and memorise all available stations in your area in order to
record programmes correctly. Once done, pressing the A or B buttons enables you
to jump to the available channels without going via any vacant channels. This channel
search can be done either automatically or manually. You should only need to perform
either of the following procedures if Auto Setup or Preset Download has failed to identify
and record available channels or you have moved to a new area.

Auto Channel Setup

  Press m.

  Move the highlight bar to 

AUTO CH

SET

 using the A and B buttons and press         (or E) twice.

  If you have chosen to connect the

VCR to the TV with both the RF Cable and a 21-pin SCART Cable
(not provided) and the TV set is in its AV mode (see the TV
manual), the 

AUTO SET

 screen will appear on the TV and remains

there for about 4–12 minutes while the VCR searches for receivable
stations. During Auto Channel Set the S mark on the screen moves from left to right.

note:

 If you have connected both the RF cable and the fully-wired

21-pin SCART cable, and if your TV offers T-V Link, etc., and the
TV is turned on, the VCR automatically performs the Preset
Download (

 pg. 12) even if you select “Auto’ for Auto Setup

function.

The caption 

SCAN COMPLETED

 appears at the end of the process for

about 5 seconds.

  Once Auto Channel Set has completed its search, the confirmation screen

will appear showing the details (

PR

 = Preset Number, 

CH

 =

Channel Number and 

ID

 = Station Name) of the TV stations that

the process has found. The first station will have a highlight bar
over it and will be blinking. This screen and the programme
currently being broadcast on the selected station will alternate at
8 second intervals. To view the next channel, press the A and
B

 buttons to move the highlight bar to the required channel.

  Press m.

  In certain reception conditions, station

names may not be stored correctly by the VCR and Auto Guide Program Number Set may not
work properly. If  the Guide Program Numbers are not set, entering a PlusCode number, may
result in an incorrect channel being recorded.

  The VCR memorises all stations found regardless of their quality. If a station’s

quality is poor, you can delete that station from the memory (see page 50).

OK

3

/

[10]
a

 k: EDIT

a

 [x]: DELETE

[1] a k
[MENU]: EXIT

F

  HR-J795EK-EN/p48-53

5/28/02, 11:39 AM

48