Manualsbrain.com
  1. Manuals
  2. Brands
  3. JVC
  4. HR-S6850EU
  5. User Manual

JVC HR-S6850EU User Manual

Download
Page of 68
Masterpage:Right-NoTitle0
EN
 
59
Filename [HRS6850EU4.fm]
Page 59
April 12, 2001 9:59 am
E
Set the date and time.
Press 
rt
 to set the time, then press OK or 
e
. The 
“DATE” display begins blinking. Repeat the same 
procedure to set the date and year.
● When you set the time,  press and hold 
rt
 to change the 
time by 30 minutes.
● When you set the date,  press and hold 
rt
 to change the 
date by 15 days.
F
Set Just Clock.
The default setting is “OFF”. Set as desired by pressing 
rt
, then press OK or 
e
.
● For the Just clock function, refer to “Just Clock” on page 58.
● If you set to “OFF”, you can disregard the next step as you 
won’t be able to receive regular clock adjustments.
G
Set the source channel position for clock 
data.
The recorder is preset to receive clock setting and 
adjustment data from channel position 1.
Press 
rt
 to set the channel position to the number 
representing the station transmitting clock setting data, 
then press OK or 
e
.
H
Start the clock operation.
Press MENU.
NOTES:
● Just Clock (when set to “ON”) adjusts the recorder’s built-in 
clock every hour, except for 23:00, 0:00, 1:00 and 2:00.
● Just Clock is not effective when ...
... the recorder’s power is on.
... the recorder is in the Timer mode.
... a difference of more than 3 minutes exists between the 
built-in clock’s time and the actual time.
... the recorder is in the Automatic Satellite Programme 
Recording mode (
墌
pg. 33).
... the recorder is in the Power Save mode (
墌
pg. 49). 
... “L-2 SELECT” is set to “SAT” (
墌
pg. 41).
● If Just Clock is set to “ON”, the recorder’s clock is 
automatically adjusted at the start/end of Summer Time.
● Just Clock may not function properly depending on the 
reception condition.
HRS6850EU1.book  Page 59  Thursday, April 12, 2001  10:16 AM