JVC HR-S9500U User Manual

1

2

3

4

5

6

7

8

9

0

2

4

1

3

You can directly program the VCR’s timer to record up to 8
shows, as far as a year in advance. Remember, the clock must be
set before you can program the timer (

Z

 pg. 8 or 11).

Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).

LOAD A CASSETTE

Make sure the record safety tab is intact. If not, cover
the hole with adhesive tape, then load it into the VCR.

● The VCR comes on, and the counter is reset,

automatically.

ACCESS VCR PLUS+

SCREEN

Press PROG.

ACCESS PROGRAM

SCREEN

Press START +/–. (If you’re
just starting out,
“PROGRAM 1” appears.)

SET PROGRAM START TIME

Press START +/– to enter
the time you want
recording to start.

● Press and hold START

+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.

SET PROGRAM STOP TIME

Press STOP +/– to enter the time you want recording to
stop.

● Press and hold STOP +/– to move in 30-minute

increments, or press and release repeatedly to move 1
minute at a time.

SET PROGRAM DATE

Press DATE +/–. (The current date is displayed on
screen. The date you enter appears in its place.)

SET CHANNEL NUMBER

Press CH +/–.

● If you are using a DBS receiver, see "ATTENTION

FOR DBS RECEIVER USERS" on next page.

● Holding down CH +/– rapidly scans through the

channels.

= – –:– –AM

= – –:– –AM