JVC HR-S9400U User Manual

Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack. Use your VCR as the
recorder.

Audio Dubbing

MAKE CONNECTIONS

Connect an audio component to the AUDIO IN L + R
connectors on the VCR's front panel. *When connect-
ing monaural equipment, use only the VCR's AUDIO
IN L connector.

SET INPUT MODE

Press NUMBER key "0" on the remote control. "AU"
appears in place of a channel number.
● Be sure to select "FRONT S-VHS" or "FRONT VIDEO"

at the AUX Input Screen. (To select the correct AUX
input connector, follow steps 4, 9 – 11, 15 from the
"Edit From A Camcorder" section,

pg. 52.)

LOCATE START POINT

Press PLAY to start playback of the tape in your VCR,
and press PAUSE when you find the point where you
want to start dubbing.

ENGAGE AUDIO DUBBING

Press A. DUB.

● Your VCR enters the Audio Dubbing Pause mode.

(REC blinks, PLAY and PAUSE light up on the front
display panel.)

START DUBBING

Engage the audio component's Play mode, then press
PLAY to start the tape in your VCR. Audio dubbing
begins at this point.

● REC blinks and PLAY is displayed on the front display

panel.

● To stop dubbing temporarily, press PAUSE. Press

PLAY to resume dubbing.

END AUDIO DUBBING

Press STOP to stop the tape in your VCR, and engage
the audio component's Stop mode.

Pre-recorded tape

Audio-dubbed tape

Normal audio track

Video/Hi-Fi audio
track

STOP

PLAY

A. DUB

PAUSE

Audio cable

Audio component

(CD player etc.)

NOTES:

● When monitoring the sound during Audio Dubbing, the

normal soundtrack is automatically selected. If you wish to
hear the Hi-Fi or mixed sound (Hi-Fi + Normal soundtracks),
refer to the "Select The Soundtrack" section (

pg. 32) and

select the soundtrack you wish to hear.

● Audio dubbing stops automatically when the counter reaches

", and the VCR enters the Play mode. Check the

counter reading before dubbing.

● Audio dubbing is also possible using the rear AUDIO IN

connectors. When using these connectors, be sure to select
"REAR S-VHS" or "REAR VIDEO" at the Aux Input screen. To
select the correct Aux Input connector, follow steps 4, 9 – 11,
15 from the "Edit From A Camcorder" section

pg. 52.

● Audio dubbing cannot be performed on a cassette that has

had its record safety tab removed.

● When playing back an audio-dubbed tape, refer to the "Select

The Soundtrack" section (

pg. 32) to select the soundtrack

you wish to hear.

● Picture may be distorted during Audio Dubbing Pause.