JVC HR-S9400EE User Manual
EN
5
AV1 OUT
COMP. Y/C
AV1 IN/OUT
RF OUT
AV2 IN
PAUSE/
R.A.EDIT
R.A.EDIT
ANT.IN
R
R
L
L
AUDIO
IN
OUT
S
IN
OUT
Back of Recorder
AV1 OUT Switch
To AV1 IN/OUT
connector
connector
To AV-IN
terminals
terminals
Output cable adapter (not provided)
If TV has no 21-pin SCART connector:
Connect an optional AV cable between the TV's AV-IN terminals and the AV1 IN/OUT connector on the rear panel of the
recorder via the optional output cable adapter as illustrated.
recorder via the optional output cable adapter as illustrated.
AV cable
(not provided)
(not provided)
TV
Recorder
AV1 OUTPUT SIGNAL SELECTION
The AV1 IN/OUT connector accepts only a composite signal (regular video signal), but can deliver either a composite video
signal or a Y/C signal (a signal in which the luminance and chrominance signals are separated) according to the setting of the
rear panel AV1 OUT switch.
signal or a Y/C signal (a signal in which the luminance and chrominance signals are separated) according to the setting of the
rear panel AV1 OUT switch.
● If your TV's 21-pin AV input connector (SCART) is compatible only with the regular video signal, set this switch to COMP.
● If your TV's 21-pin AV input connector (SCART) is compatible with the Y/C signal, set this switch to Y/C. You will better enjoy
high-quality S-VHS pictures.
IMPORTANT:
● Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV's SCART connector.
● For switching the TV's mode, refer to the instruction manual of your television.
AV1 IN/OUT
TV Aerial Cable (not provided)