Sony DCR-IP7E User Manual
72-
GB
Messages
Various messages appear on the screen. Check the corresponding descriptions in the
following list.
following list.
General
Message
Meaning
Bluetooth Connection Error
Bluetooth
Authentication Error
Check the Certified Status
Authentication Error
Check the Certified Status
Bluetooth
Registration Error
Check the Passkey
Registration Error
Check the Passkey
Bluetooth Communication
Disconnected
Disconnected
Bluetooth
Connection Error
Select Bluetooth Device
Connection Error
Select Bluetooth Device
PPP Authentication Error
Check ID or Password
Check ID or Password
Phone Line Disconnected
Connection Error
No Response From PPP Server
No Response From PPP Server
Bluetooth Connection Error
Check Phone Line
Check Phone Line
Low Battery
Profile Error
Reset Profile
Reset Profile
Memory Error
Memory Stick Error
Memory Stick Error
Outgoing Mail Canceled
Outgoing Mail Canceled
Memory Stick Error
Unable to Open the File
Unable to Open the File
Memory Stick Error
Action Canceled
Action Canceled
Memory Stick Error
Incoming Mail Canceled
Incoming Mail Canceled
Memory Stick Format Error
Enter PPP Password
Saving the Profile
• The Bluetooth device is too far from the camcorder.
• The Bluetooth device is busy.
• The Bluetooth device is busy.
Register the Bluetooth device again.
• The passkey was wrong.
• The passkey transmission failed.
• The passkey transmission failed.
• The Bluetooth device was turned off.
• The Bluetooth device is too far from the camcorder.
• The Bluetooth device became impossible to connect.
• The Bluetooth device is too far from the camcorder.
• The Bluetooth device became impossible to connect.
No Bluetooth devices are registered. Register the Bluetooth device
(p. 15).
(p. 15).
Your ID or password entered on the PPP screen during manual
setup may be wrong.
setup may be wrong.
Check the connection status.
• The telephone number entered on the PPP screen in manual setup
may be wrong.
• The setup of Modem Init on the Network Options screen is wrong.
Check that the Bluetooth device is connected to a telephone terminal.
The capacity of the battery pack is insufficient. Change the battery
pack or use the AC power adaptor.
pack or use the AC power adaptor.
Check the setup. If an entry is missing, set up again referring to your
notes.
notes.
Exit the NETWORK mode, then enter the NETWORK mode again.
The “Memory Stick” may be broken. Do the following; exit the
NETWORK mode, turn off the camcorder, remove and insert the
“Memory Stick”, then operate the camcorder. If, the message still
appears, use another “Memory Stick”.
NETWORK mode, turn off the camcorder, remove and insert the
“Memory Stick”, then operate the camcorder. If, the message still
appears, use another “Memory Stick”.
Format the “Memory Stick”.
For details on “Verify Password”, see “Setting network options
preferences” (p. 26).
preferences” (p. 26).
Do not turn off the camcorder while the message is indicated.