Sony UPX-C100 User Manual

Operations (Shooting and Printing)

21

Press the 1 button on the camera.

Set the mode dial to 

 – 

.

When the image resolution is set to HIGH-ID or 
STD-ID, set the frame by pressing the V/

 control 

button.

Point the camera at the subject, and adjust the frame 
while monitoring the camera LCD.
Pressing the zoom lever allows you to adjust the 
frame by zooming.

 (T): Telephoto zoom.

 (W): Wide-angle zoom.

Press the release button halfway until the focus 
mark turns green, then press the button the rest of 
the way.
A picture is taken, and it appears immediately on 
the LCD. This feature is known as the auto-review 
display. The picture is also simultaneously stored in 
the camera’s internal memory. During the transfer 
of data to memory, the standby lamp flashes orange. 
Once the data is stored and the built-in flash is 
charged for the next picture, the standby lamp turns 
green.

Pictures can be printed directly from the auto-review 
display without switching the mode dial setting.

If the focus mark turns red when you press the release 
button halfway, the picture is not in focus or the 

automatic exposure control has failed. Slowly press the 
release button halfway again.

To take the next picture, press the release button or zoom 
lever to turn off the auto-review display, and then repeat 
steps 4 and 5.

Perform the following steps to delete the last picture 
taken while it appears in the auto-review display.

Press the 

/  button.

A screen asking you to confirm deletion appears.

Select OK by pressing the V control button, and 
then press the ENTER button.
The picture displayed on the LCD is deleted, and 
the camera returns to Capture mode.

The following is an example of how the LCD may 
appear when the mode dial is set to 

 – 

.

Standby lamp

Resolution

ISO sensitivity

Pictures remaining (Estimated number 
that can be taken at the set resolution)

White 
balance

Shooting condition

2)

1) Appears only when the zoom lever is pressed.
2) Display of exposure & flash mode, shutter speed, 

aperture, ISO speed, and exposure compensation value 
may vary depending on the EXPOSURE & FLASH 
setting.

Exposure 
compensation 
value

Camera shake warning

Set resolution

Frame No.

1)

Focus mark