Pelco C1528M-F User Manual
58
C1528M-F (6/05)
PASSWORD
Use the Set Password screen to change the system password.
If you change the password and then forget the new one, you will have to reset the system to the factory defaults. All system programming will
be lost. Pelco recommends uploading your programming settings to the CM6800-MGR before changing the password. This allows you to
download the previous system settings, in the event of a system reset. If necessary, refer to the Troubleshooting section for the system reset
procedure.
be lost. Pelco recommends uploading your programming settings to the CM6800-MGR before changing the password. This allows you to
download the previous system settings, in the event of a system reset. If necessary, refer to the Troubleshooting section for the system reset
procedure.
Figure 45. Set Password Screen
Use the numerical keypad to enter the old and new passwords. The password must be seven digits.
1. Enter the current password (Default: 2899100).
2. Enter the new password.
3. Enter the new password again as a verification check.
Once the new password is accepted, the Main Menu appears.
PELCO SWITCHER
MODEL CM6800E
MAIN MENU
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CAMERA
LOGICAL CAMERA
MONITOR
ACCESS
TIME & DATE
PORT
PRIORITY
SEQUENCE
MACRO
ALARM CONTACTS
EVENT TIMER
SET AUXILIARY
SET PASSWORD
SYSTEM
ABOUT CM6800E
ENGLISH
RETURN
SET PASSWORD
OLD PASSWORD: *******
NEW PASSWORD: *******
VER PASSWORD: *******
RETURN