Pelco C1528M-F User Manual

C1528M-F (6/05)

63

SEQUENCE:

Select the sequence number you want to program.

STP:

Each sequence can include up to 72 steps. For each step select entries for the following fields as necessary:

CAM:

Enter the desired camera number (logical number).

DWL:

Enter the dwell time (01-99 seconds).

CMD and ##:

Select a command; if you select a pattern or a preset enter a valid pattern or preset number.

OPTIONS:
PRES = preset 
PATT = pattern
RSCN = random scan 
FSCN = frame scan
SSCN =  stop scan

AUX and ##:

Select an auxiliary to be activated.
Global = internal and external auxiliaries.

OPTIONS:
GON = turn global auxiliary on
GOFF = turn global auxiliary off
CON = turn camera auxiliary on
COFF = turn camera auxiliary off

NOTE:  Activate the auxiliaries on the rear panel of the CM6800E by selecting global auxiliary numbers 1, 
2, or 3 (in a 96 x 16 system the expansion unit auxiliaries are activated by global auxiliary numbers 4, 5, 
and 6). The remaining global auxiliary numbers control REL2064 Relay Interface Unit auxiliaries.