Pelco C1528M-F User Manual

66

C1528M-F (6/05)

If you select a restricted camera view, the camera view does not appear on that monitor. The previously selected, unrestricted camera view 
remains on the monitor.

Select a suitable camera and operate a PTZ function. A keyboard with “view-only” access can view the signal from the specified camera but 
cannot control the camera.

Extended Coaxitron protocol receivers can be operated without any programming changes. Other receiver control protocols require programming 
changes. Refer to the Programming section.

Receiver control is not available with the KBD100 keyboard.

1. Enter the camera number.

2. Press the CAM key.

OR

Press the BWD or FWD key to scroll through the available cameras.

1. Enter the camera number.

2. Press the CAM key.

OR

Press the PREV or NEXT key to scroll through the available cameras.

OR

From the Camera Menu, select 

 or 

 to scroll through the 

available cameras.

Press and hold the appropriate pan/tilt key until the camera reaches 
the desired position. To change the speed of movement, press a 
number (1-9) key first (1=slowest, 9=fastest). Press and hold the 
appropriate zoom key until the desired effect is seen.

Press and hold the appropriate lens control key until the desired 
effect is seen.

Move the joystick until the camera reaches the desired position. To 
increase the speed of movement, move the joystick farther from 
center.

Twist the joystick clockwise to zoom in, counterclockwise to zoom 
out.

Press and hold the appropriate lens control key until the desired 
effect is seen.

Move the joystick until the camera reaches the desired position. To 
increase the speed of movement, move the joystick farther from 
center or press the T key to pan at turbo speed.

Twist the joystick clockwise to zoom in, counterclockwise to zoom 
out. Or use the IN/OUT key to zoom in or out.

Use the NEAR/FAR key to focus near or far.

Use the OPEN/CLS key to open or close the iris.