Pelco C1528M-F User Manual

94

C1528M-F (6/05)

If you are having problems gaining control of your system for the first time:

•

Confirm that all system equipment is plugged in and has power.

•

Confirm that each keyboard and peripheral device in your system has a unique local address. Refer to the Switch Settings section in the 
appropriate keyboard manual. 

•

Be sure data cables have not been mixed up. 

•

Cycle the data cable to the keyboard:

1.

Unplug the data cable from the rear of the keyboard. 

2.

Plug the data cable back into the rear of the keyboard.

3.

WAIT AT LEAST FIVE SECONDS.

4.

Select a monitor.

If you still cannot gain control of the system:

•

Confirm the wiring is correct and the user-supplied cable between wall jacks is appropriate for the application.

•

Confirm that when the keyboard data cable is cycled, the keyboard LED flashes momentarily (indicating power).

If you still cannot gain control of the system, call Pelco’s 24-hour technical support at 1800-289-9100 or 1-559-292-1981.

NOTE:  There are no user-serviceable parts inside the CM6800E. Only authorized service personnel may open the unit.