ZyXEL Communications LTE6100 User Manual

 Chapter 5 Home Networking

LTE6100 User’s Guide

Click Network Setting > Home Networking to open the LAN Setup screen. Use this screen to 
set the Local Area Network IP address and subnet mask of your LTE Device and configure the DNS 
server information that the LTE Device sends to the DHCP client devices on the LAN.

Network Setting > Home Networking > LAN Setup 

The following table describes the fields in this screen.  

Network Setting > Home Networking > LAN Setup 

LAN IP Setup

IP Address

Enter the LAN IP address you want to assign to your LTE Device in dotted decimal notation, 
for example, 192.168.1.1 (factory default). 

IP Subnet Mask 

Type the subnet mask of your network in dotted decimal notation, for example 
255.255.255.0 (factory default). Your LTE Device automatically computes the subnet mask 
based on the IP address you enter, so do not change this field unless you are instructed to 
do so.

DHCP Server State

DHCP

Select Enable to have your LTE Device assign IP addresses, an IP default gateway and DNS 
servers to LAN computers and other devices that are DHCP clients.

If you select Disable, you need to manually configure the IP addresses of the computers 
and other devices on your LAN.

When DHCP is used, the following fields need to be set.

IP Addressing Values

IP Pool Starting 
Address

This field specifies the first of the contiguous addresses in the IP address pool.

Pool Size

This field specifies the size, or count of the IP address pool.

DNS Values